Before explaining how to repair a PVC pipe, it must be said that unlike the drain pipes used for the water system, some PVC pipes do not have a gasket inside. The gasket, in fact, allows the tube to be inserted in a manual manner to seal with water. In the PVC pipe instead, a glue is used which, once hardened, is able to optimally keep the water flowing inside the pipes.

The PVC pipe is an orange plastic pipe, which is used for sewers and to make the various movements curves and tees are used. When inserting a tube into another tube or curve, use a special orange-colored glue , which is placed around the edges of the tube and also inside the curve.

The glue is used to hold together and lock the pipe to the curve, so as not to lose water in the pipe. For greater safety, it is possible to use the glue also placing it between the curve and the pipe, so that it keeps the water circulating inside the pipes in a watertight manner. The PVC pipe is very simple to use, just use it with the appropriate glue.

What are PVC pipes

The PVC pipes are made of rigid plastic, and as soon as the glue has dried, between one pipe and another, it becomes almost impossible to detach the two pipes glued together.

What to do if you notice a water leak coming out of a pvc pipe?

If you notice a water leak coming from the PVC drain pipes, you can call the Rome emergency service plumber near me, or check the exact spot where you lose water, or try to figure out if the water comes out between the insertion of the two tubes or if the tube is cracked or broken. If you need to replace the hose, all you have to do is call the plumber Rome and province .

If you are sure that the hose is not broken, you can buy the special glue for PVC orange pipes, just like PVC pipes. To use it correctly, you have to spread it without leaving empty spaces. If you put it well the tube should be repaired.

If instead the pipe is broken , it is better to contact the local Carlsbad plumber , who will have to replace the damaged pipe or joint. If you want to try it yourself, you need to be sure you are up to the task because it is not a simple thing, since once the glue dries the tubes do not come off easily.

If you have damaged the curve or the tee , you can try heating the pipe where the curve is inserted, using a lighter, setting fire to a piece of cardboard. Approaching it, to heat the curve and the pipe, they should come off. When you manage to extract the damaged curve, at that point you can insert a new one.